Wsdcam Wifi Doorbell 120 Degree Wide Angle Peephole Doorbell 1080P Digital Doorbell Viewer Motion Detection

Camera perspective: Wide angle 120 ° Memory card: supports up to 128GB WiFi mode: 2.4G WIFI Input: 5V/1A Applicable door thickness: 35mm-115mm. Applicable door aperture: 15mm-36mm. The storage card format used for the doorbell is FAT, and the transmission rate needs to reach C10 Charging interface: Type-c Packaging size: 238 * 121 * 65mm Charging cable length: 3m Power supply: Rechargeable 5000mAh lithium-ion battery (built-in), can be used normally (3-5 times a day) for about 1 week; 30 days of standby time. The app provides real-time reminders that when the battery level is below 5%, the device will prompt low battery, and the app cannot connect to the device when the battery level is low. Main functions: Using microwave radar to detect alarms, as long as someone stands at the door, the alarm will be triggered 1080P high-definition video doorbell camera, 4.3-inch display screen Built in 5000mAh rechargeable battery and 5V 1A USB cable for power supply, with low battery alarm function Stay alarm notification. When someone stays at the door, the camera will capture and record a video, which can be viewed during playback (requires a memory card) One way intercom, can only hear the voice of visitors, cannot communicate with visitors Clear night vision. Provide day and night monitoring PIR motion detection. 120 ° angle, when the cat's eye detects movement, the APP will push notifications Intelligent playback. If you insert a micro SD card, you can check the video recording anytime on the APP follow-up Download the free app "Smart Life" or "Tuya Smart" from Google Play or Apple Store Attention: 1. The charging cable is 3m long. When charging, it is recommended that customers do not remove the main unit and charge directly from the door (accidentally removing the main unit may damage the ribbon cable) 2. Do not use a fast charging head for charging, as using a fast charging head may burn out the host 3. Unable to connect to the network. Please check if the network is 2.4G and if the password is entered correctly 4. Fully charge the battery before installation