Magnētiskais lādētājs Galaxy Pro ātrā USB dokstacija Samsung pulkstenim 5 4 3 2 1 universāla uzlāde

Note: 1. The Charger is Suitable for All Samsung Original Watches(excluding bracelets). 2. Please plug into the USB port onto PC, Laptop, or Notebook. If you connect it to the adapter, the current must not exceed 1A. 3. The Bracket with an inner diameter of 34mm is Suitable for the Original Charger of the Galaxy Watch 3/4 series. 4. The Bracket with an inner diameter of 28mm is Suitable for the Original Charger of the Galaxy Watch 5/5pro. 5. To avoid situations where the bracket is not suitable, we sest measuring the diameter of own charger before purchasing the bracket, and then selecting the corresponding size bracket, thanks Magnetic Watch Charger Applicable Model: For Samsung Galaxy Watch 5 (40MM/44MM) For Samsung Galaxy Watch 5 pro (45mm) For Samsung Galaxy Watch 4 (40mm SM-R860) For Samsung Galaxy Watch 4(44mm SM-R870) For Samsung Galaxy Watch 4 classic (42mm SM-R880) For Samsung Galaxy Watch 4 classic (46mm SM-R890) For Samsung Galaxy Watch 3 (41mm SM-R850) For Samsung Galaxy Watch 3 (45mm SM-R840) For Samsung Galaxy Watch Active 1 (40mm SM-R500) For Samsung Galaxy Watch Active 2 (40mm SM-R830) For Samsung Galaxy Watch Active 2 (44mm SM-R820) Bracket for Watch 4 Material: Silicone Spot color: black, white Compatible models are as follows For Samsung Samsung Galaxy Watch 3 (41mm SM-R850) For Samsung Galaxy Watch 3 (45mm SM-R840) For Samsung Galaxy Watch Active 1 (40mm SM-R500) For Samsung Galaxy Watch Active 2 (40mm SM-R830) For SamsungGalaxy Watch Active 2 (44mm SM-R820 For Samsung Galaxy Watch 4 (40mm SM-R860) For Samsung Galaxy Watch 4 (44mm SM-R870) For Samsung Galaxy Watch 4 Classic (42mm SM-R880) For Samsung Galaxy Watch 4 Classic (46mm SM-R890) Bracket for Watch 5 Material: Silicone Spot color: black, white Compatible models are as follows For Samsung Galaxy Watch 5 For Samsung Galaxy Watch 5 Pro Charger Introduction: 1. Because the charger is equipped with overvoltage protection, it takes 3-10 seconds for the charging watch to display the start of charging. 2. Material: The shell is made of flame retardant material, which is safer; the wire is made of TPE material, which is softer than PVC and feels very comfortable. 3. Texture: fine texture, closer to the original, better experience. 4. Scheme: Nanxin 5002+ main control MCU (low-cost single-chip microcomputer is generally used in the market), which is more powerful than single-chip microcomputer. Compared with single-chip microcomputer, its charging speed will be more than 20 minutes faster. 5. The charger uses a chip imported from South Korea, and the temperature will be lower; even in summer, it is not afraid. 6. Input voltage: 5V/1A 7. Output voltage: 5V/0.5A 8. Charging Method: Wireless Charger 9. Charging Protocol: Standard QI protocol 10. Material: ABS+PC (flame retardant) Package: 1 x Charger   /   1 x Bracket