Children's Fully Automatic Storage Large Capacity Electric Absorbing Gun Summer Outdoor Water Toy Gift

Package includes： 1 * Automatic Water Gun 1 * Battery 1 * USB Charging Cable Packing is Mail Box Note/Tip: 1. Open the lid and fill with water. Fill enough water into the water gun. Pump the pressure pump back and forth several times. When sufficient pressure is injected, the water gun can spray over a greater distance. As shown in the figure below, the small white hole on the water gun is the pressure release hole. Because both of these water guns can be electrically suctioned to draw water from the gun to replenish the water inside, when the water in the water gun is full and you still try to draw water into the gun or the water pressure inside the gun is too high, the water inside the gun will leak out from this hole to prevent the excessive water pressure inside the gun from damaging it. The water overflowing from this hole is not a quality issue of the product.It is the normal protective mechanism of the gun and a normal phenomenon. 2. Please make sure that the water in the water gun is pure. e water and not seawater or any other water containing impurities.Otherwise, it may damage the water gun and cause malfunction. 3. Always remove the battery from the toy/charger when it is not being used for an extended period of time. Empty the water tank and gently wipe the toy with a clean cloth when storing it. Note: All dimensions are measured manually with a deviation (range) of 1-3CM.