Vēdera vidukļa EMS muskuļu stimulators Fiess Trainer Vēdera treniņš svara zaudēšanai Uzlīmes ķermeņa novājēšanai

Introduction of EMS micro current stimulation The principle of EMS fiess is to transmit micro-current signals to the human body through EMS equipment.The frequency of micro-current signals is in the range of 40HZ to 2500HZ(lt belongs to the middle and low frequency current, and can only impact the muscle layer).The human body recognizes these current signals as human bio-electricity signal.The signal can stimulate muscle contraction and achieve the purpose of reducingfat and slimming EMS provides users with a weight-free fiess method,which avoids the body damage caused by traditional fiess method or lack of professional guidance The biggest advantage of EMS is high efficiency and low frequency. It is reported that use high-quality EMS training massage patch for 20 minutes is equivalent to 120 minutes of exercise in the gym. Inferior massage patches cant do it well so as to cant achieve goals of fiess and weight loss Instructions 1. Disassemble the packing bag and mount host on the massage patch 2.Remove the transparent protective film from the massage patch. 3. Attach the massage patch to the body part that need massage. 4. Start up:Long press the+button for 2 minutes to start and the green light is on.The default intensity is 0 level.Then press the+buttor to increase the strength,and green lights flicker when working 5.Press the - button to decrease the strength. 6.Mode change: press the M button to select modethen press+to increase intensity, Mode can also be changed duringworkingand the default mode is 1 level after changing mode. 7.Shutdown: Keep pressing the- button to decrease the strength until the green light is off. 8.After shutting down,remove the massage patch and cover the protective film, then put it in a cool place. Reminder: The host will shut down automatically when massage patch has been removed for 10 seconds.